How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Mercury
Satisfied Customers: 22519
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Mercury Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

No voltage in blue wire,what now?

Customer Question

no voltage in blue wire,what now?
Submitted: 1 year ago.
Category: Mercury
Expert:  Ron replied 1 year ago.
Hello and thank you for your question,What are you working on, year, make and model and what blue wire are you referring to?
Customer: replied 1 year ago.
1989 mercury cougar,turn signal wire on the switch
Expert:  Ron replied 1 year ago.
Is this the one you working on the tail lights?
Customer: replied 1 year ago.
none of the turn signals work,flashers are fine
Customer: replied 1 year ago.
i was working off an original answer you gave 4 years ago
Customer: replied 1 year ago.
can't get answers on text,please post on line
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!I'm showing the blue wire at the switch comes from the flasher and is for the hazards, if the hazards work then this wire isn't in question.The wire you're concerned with at the switch as far as power is concerned is white/red. Does this wire have power with the key on?

Related Mercury Questions