How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE
HDGENE, ASE Certified Technician
Category: Mercury
Satisfied Customers: 4916
Experience:  25 years experience Ford Senior Master Technician/Diesel certified ASE Master Technician
285738
Type Your Mercury Question Here...
HDGENE is online now
A new question is answered every 9 seconds

Just had to replace the blend door actuator. During the dash

Customer Question

Just had to replace the blend door actuator. During the dash slipped a bit I believe pulling on the steering colum. Reassemble and the steering wheel spins free without resistance or moving the wheels. ?
Submitted: 1 year ago.
Category: Mercury
Expert:  HDGENE replied 1 year ago.

Hello, is the steering column shaft separated? It has a slip joint that can split apart