How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Mercury Technician
Category: Mercury
Satisfied Customers: 1938
Experience:  16 years experience with Mercury
2499435
Type Your Mercury Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Replaced the battery in a 1999 Grand ***** *****, and need

Customer Question

Customer: Replaced the battery in a 1999 Grand ***** *****, and need to know how to reset the alarm
JA: Thanks. Can you give me any more details about your issue?
Customer: The battery died, and we put a new battery in the car. The car won't start and the alarm goes off each time it is attempted. Is there an alarm reset procedure after replacing the battery?
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $18) to post your type of question to Mercury Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: If you have the answer, that is fine...
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Mercury
Expert:  Don 'Mo Lurch' replied 1 year ago.

Is this Factory or Aftermarket Alarm? (horn & lights or Siren & lights)
Does the "THEFT" or "SECURITY" Light flash on the Dash?
How many Factory Ford / Mercury Ignition Switch Keys do you have for this car?

.

Customer: replied 1 year ago.
It's an after market... Never mind, because I already fixed the problem....
Thanks
Expert:  Don 'Mo Lurch' replied 1 year ago.

good going.........
thank you for the update