How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony
Anthony, ASE Certified Technician
Category: Mercury
Satisfied Customers: 11750
Experience:  ASE Master Automobile Technician with over 20 years exp. in this field.
15218643
Type Your Mercury Question Here...
Anthony is online now
A new question is answered every 9 seconds

The key won't turn back to the off position in my 1991

Customer Question

The key won't turn back to the off position in my 1991 Mercury Grand Marquis. Seems to be the ignition cylinder. How do I replace it? Do I need a steering wheel puller?
Submitted: 1 year ago.
Category: Mercury
Expert:  Anthony replied 1 year ago.

Hello!

Take the plastic trim off the column that surrounds the lock. Then turn the key to run. Under the lock you will see a 1/8 diameter hole. Stick a pin in that hole and then you can just pull the lock right out.