How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Mercury
Satisfied Customers: 33424
Experience:  ASE Certs and Ford Certs
7276279
Type Your Mercury Question Here...
Ron is online now
A new question is answered every 9 seconds

Mercury topaz gs: 1) would like to know the spec output

Customer Question

1) would like to know the spec for tps output volts on 94 merc topaz 2.3 ltr auto.
2) the correct signal from maf to pcm as wire d on connector. Believe its .9v-1v.
Have dtc157 in pcm. Signal vlts is .11 does not increase with rpm. Bad maf??
Submitted: 1 year ago.
Category: Mercury
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
I have enclosed the steps to measure the TP signal and voltage as well as the MAF sensor, see them in the link below, copy and paste the links to your browser to open and view them.
https://dl.dropboxusercontent.com/u/104923897/TP%20testing%20Jul%2028.pdf
https://dl.dropboxusercontent.com/u/104923897/MAF%20Jul%2028.pdf

Related Mercury Questions