How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Mercury Technician
Category: Mercury
Satisfied Customers: 1913
Experience:  16 years experience with Mercury
2499435
Type Your Mercury Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Mercury Villager: have changed distributer,wires,plugs,waterpump.thermostat,hoses,belts,fu

Customer Question

have changed distributer,wires,plugs,waterpump.thermostat,hoses,belts,fuelpump,strainer,checked exhaustsystem ok,when heats up cuts out shuts down want restart until it cools down then runs good till gets good and hot.
Submitted: 1 year ago.
Category: Mercury
Expert:  jazzmaster replied 1 year ago.
hi, do you have a tach/rpm gauge in the dash cluster ?
if you do check it for movement when it quits and wont restart .
or if you have access to a scanner that can show rpms see if the rpms are moving when you crank it over .
I suspect the crank sensor is causing this issue and have been known too as well.
also, check for spark that will indicate a crank sensor problem.
does the check engine light come on and stay on ?
and if so what are the codes ,please ...jazzmaster ..
Expert:  jazzmaster replied 1 year ago.
hello, I am checking back to see if I helped you or if you still need assistance with your vehicle issue thank you ...jazzmaster ..

Related Mercury Questions