Here is Mercury procedures
click link below for diagramsREMOVE RADIATOR
Disconnect battery ground cable, then drain engine coolant. Disconnect upper radiator hose, then remove two fasteners retaining upper end of fan shroud to radiator end tank. On models equipped with air conditioning, proceed as follows:Remove nut and screw retaining upper end of fan shroud to radiator at cross support, then nut and screw at end tank. Disconnect air conditioning discharge line from shroud.Disconnect fan wiring and remove fan shroud from vehicle. Disconnect lower radiator hose. On models equipped with automatic transaxle, disconnect oil cooler lines. Remove two nuts retaining top of radiator to crossmember, then tip radiator back to allow clearance with upper mounting stud and lift radiator from vehicle. Reverse procedure to install.
Your DEPOSIT is not payment
I have sent the information you have requested & have answered .If you have more questions, it is considered to be "additional" & may have to Relist.
PLEASE click ACCEPT on your page, so that I may get credit for my Answer at this time, thanks.