How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Mecury Mechanic
Category: Mercury
Satisfied Customers: 20526
Experience:  Ford Cert., Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Mercury Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Mercury Grand Marquis: How do I program a new remote door key

Customer Question

How do I program a new remote door key fob for for my 2003 Gramd Marquis?
Submitted: 4 years ago.
Category: Mercury
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

 

NOTE: All remote transmitters that are programmable and must be set at the same time.

 

Make sure that the anti-theft system is not armed or triggered.
Turn the ignition switch from OFF to RUN four times within three seconds , ending in RUN.

The locks will then lock and then unlock, confirming program mode has been entered.
Press any button on a keyless entry remote transmitter, and the door will lock and then unlock to confirm that each remote transmitter has been programmed.
If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds .
To exit program mode, wait 7.5 seconds .

 

 

 

Your DEPOSIT is not payment

I have sent the information you have requested & have answered .
If you have more questions, it is considered to be "additional" & may have to Relist.

PLEASE click ACCEPT on your page, so that I may get credit for my Answer at this time, thanks.

 

 

 

 

Don 'Mo Lurch' and 4 other Mercury Specialists are ready to help you
Customer: replied 4 years ago.
It worked!! Thank you very much for your qick and correct responce
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

 

THANK YOU..................

 

Thanks for using J/a