How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Mercury
Satisfied Customers: 18591
Experience:  ASE Master 15+ years
13574682
Type Your Mercury Question Here...
George H. is online now
A new question is answered every 9 seconds

Mercury Sable hOW TO REMOVE THE AC Compressor on a 2002 Mercury

Customer Question

hOW TO REMOVE THE AC Compressor on a 2002 Mercury Sable
Submitted: 5 years ago.
Category: Mercury
Expert:  George H. replied 5 years ago.

Hello I will help you with your question,

 

What is the 8th digit of the VIN?

 

 

For the "U" code engine the procedure is below, let me know if you have the "S" or "2" code engine.

 

 

First you recover whatever is in the system the follow the procedure below. Look this over and let me know what questions you have about it.

 

Click here for procedure

 

Thank you

 

 

 

George H. and 6 other Mercury Specialists are ready to help you
Customer: replied 5 years ago.

do the compressor come off from the bottom?

do I need to remove the power sterring pump 1st?

Expert:  George H. replied 5 years ago.

What is the 8th digit of your VIN?

 

 

Customer: replied 5 years ago.
U
Expert:  George H. replied 5 years ago.

Ok, wanted to be sure we were working on the same engine. No the compressor drops out the bottom once you remove the manifold hose and note that the upper bolt stays with the compressor as there is not enough room to remove it until you have the compressor out of the vehicle. Just loosen it and leave it in place.

 

Let me know how I can help

 

Thank you

 

 

Customer: replied 5 years ago.

Ok I'll try that. thanks

Expert:  George H. replied 5 years ago.

Let me know if you have further questions

 

Thanks for using JA!!