How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Mercury
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Mercury Question Here...
brownjeff is online now
A new question is answered every 9 seconds

Replace front wheel bearing 2002 villager?

Resolved Question:

replace front wheel bearing 2002 villager?
Submitted: 5 years ago.
Category: Mercury
Expert:  brownjeff replied 5 years ago.
Hello and Welcome to JustAnswer,

My name is XXXXX XXXXX I am here to try and assist your with your question. On this model the knuckle needs removed and the bearing pressed out. Here is some information to help

  1. Remove the wheel knuckle.

Remove the snap ring from the wheel knuckle


  1. Using the special tool, press the wheel hub out of the wheel knuckle.


  1. To install, reverse the removal procedure.
Customer: replied 5 years ago.
ok I have the rotor off.Do i need to take top 2 bolts and bottom bolt w/cotton pin out also?
Expert:  brownjeff replied 5 years ago.
Yes correct. That will all need removed to remove the knuckle
brownjeff and 2 other Mercury Specialists are ready to help you

Related Mercury Questions