How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mustangmike_50 Your Own Question
mustangmike_50
mustangmike_50, Mercury Technician
Category: Mercury
Satisfied Customers: 801
Experience:  over 13 years as a ford,lincoln, mercury technician at a large dealership
11027379
Type Your Mercury Question Here...
mustangmike_50 is online now
A new question is answered every 9 seconds

Replace a passenger side view mirror for a 2004 Grand Marquis?

Customer Question

How do you replace a passenger side view mirror for a 2004 Grand Marquis?
Submitted: 7 years ago.
Category: Mercury
Expert:  mustangmike_50 replied 7 years ago.

heres the instructions straight from the ford repair manual.

  1. Disconnect the battery.
  2. Remove the front door trim panel.
  3. Postion the water shield aside

graphic

 

  1. Remove the pin-type retainer.
  1. Through the door opening, disconnect the power exterior rear view mirror electrical connector

graphic

 

Remove the 3 nuts and the exterior rear view mirror

 

graphic

 

To install, reverse the removal procedure

 

i hope this will help you out.

thanks

mike

Customer: replied 7 years ago.
How is that front door trim panel removed?
Expert:  mustangmike_50 replied 7 years ago.

Remove the exterior mirror cover.

Remove the interior door handle cup cover

graphic

Remove the interior door handle.

  1. Remove the screw.
  1. Remove the interior door handle and cup.

Lift the front of the window regulator switch plate from the front door trim panel and remove the window regulator switch plate.

  • Disconnect the electrical connectors.
  • Remove the front door trim panel screws.
  • graphic

  • Position the front door trim panel aside.
  • Disconnect the electrical connectors and remove the front door trim panel.

     

    1. To install, reverse the removal procedure.

     

    thanks

    mikie