How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ivan Your Own Question
Ivan, ASE Certified Master Technician
Category: Mercury
Satisfied Customers: 4871
Experience:  ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.
Type Your Mercury Question Here...
Ivan is online now
A new question is answered every 9 seconds

How to reset 2000 mercury cougar anti theft

Customer Question

how to reset 2000 mercury cougar anti theft
Submitted: 7 years ago.
Category: Mercury
Expert:  Ivan replied 7 years ago.

HelloCustomer if the system is a factory security system. The alarm should cancel by inserting the key into either door lock cylinder and rotating it fully to unlock. That should disarm the alarm.


Your JA Expert,


Customer: replied 7 years ago.
passanger door was replaced and key will not work. drivers door the lock does not work. I tried the trunck lid becuase on my jeep that works to dissarm the system. Key is not going to work. Is there another way?
Expert:  Ivan replied 7 years ago.

Ok, you need to remove the door panel, so we can gain access to the switch at the lock cylinder. Do you have the ability to perform this?



Related Mercury Questions