How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag
rpmdiag, Tech and Instructor
Category: Mercedes
Satisfied Customers: 6847
Experience:  Since 1975
12769047
Type Your Mercedes Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

Trunk will not close on 2006 SL 55, it was working fine and

Customer Question

Trunk will not close on 2006 SL 55, it was working fine and then not. Please let me know if there is a reset of some sort? Thanks so much.
Submitted: 2 months ago.
Category: Mercedes
Expert:  rpmdiag replied 2 months ago.

Hi, I'm Ron and I will be helping you today.
Stand by for a moment while I prepare your answer.

Expert:  rpmdiag replied 2 months ago.

The striker to the latch may be closed, try using the key or fob to unlatch it to be sure the 2 mate properly when engaged/contact each other.

Thanks, Ron

Customer: replied 2 months ago.
That's not it, it closes soft but does not latch all the way so I can raise or lower the top
Customer: replied 2 months ago.
Hello?
Expert:  rpmdiag replied 2 months ago.

Okay, see attachment and let me know if this helps.

I also attached a re-learn procedure for you too.

Thanks again and please remember to rate me 5 stars and also keep this link in case you need me again later on.

Ron

Customer: replied 2 months ago.
Is there a fuse reset I can do?
Expert:  rpmdiag replied 2 months ago.

No there is not. Thanks again and please let me know the results.

Ron

Expert:  rpmdiag replied 2 months ago.

I've been doing more research for you on Alldata and there are no recalls or TSB's regarding that either.

Thanks again, and if you have no further question, please remember to rate me.

I'm here to help you all that I can, so just let me know if you need anything else.

Ron

Related Mercedes Questions