How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MB Paul Your Own Question
MB Paul
MB Paul, Mercedes Technician
Category: Mercedes
Satisfied Customers: 3567
Experience:  Qualified Mercedes Benz Diagnostic Technician - 20+ years experience - Workshop Foreman for Mercedes
Type Your Mercedes Question Here...
MB Paul is online now
A new question is answered every 9 seconds

I have a 1998 e320 Mercedes crank but no start, the problem

Customer Question

I have a 1998 e320 Mercedes crank but no start , the problem start after driving It wont start when get cold start normally I replace the crank shaft sensor and now wont start even when is cold
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: no used to have bad performance in high sped
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: For now. changed gasoline filter and when there checked fuel pump was fine, checked rely and started working fine and a few hours later it started doing it again, so then replaced crank position sensor. tried again and no start just crank and no turn over
JA: Anything else you think the mechanic should know?
Customer: checked fuel fuse and was fine as well, thats as far as ive got
Submitted: 2 months ago.
Category: Mercedes
Expert:  Lou P. master tech replied 2 months ago.

Hello, my name is***** and i will do my best to assist you.I am going over your story now and will reply back soon with some info,thanks!

Expert:  Lou P. master tech replied 2 months ago.

OK so very important, since you replaced the crank sensor the engine does not start???