How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask FIXITMAN Your Own Question
FIXITMAN, Master Technician
Category: Mercedes
Satisfied Customers: 17287
Type Your Mercedes Question Here...
FIXITMAN is online now
A new question is answered every 9 seconds

I have a GL450 2011 model. The tire pressure has been

Customer Question

Hi. I have a GL450 2011 model. The tire pressure has been working normally and showing individual pressure of each wheel. Then I had a tire burst, it now only shows "tire pressure active press r to activate." What can I do to solve this?
JA: How many miles are on the car? Have you checked the pressure?
Customer: 65k
JA: What is the model of your '11 Mercedes?
Customer: GL450 2011 model
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes
JA: Anything else you think the mechanic should know?
Customer: Nothing
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mercedes Mechanic about your situation and then connect you two.
Submitted: 11 months ago.
Category: Mercedes
Expert:  FIXITMAN replied 11 months ago.

Hello, my name is***** it continues to give you this message it is because the tire pressure sensor in the tire that burst more than likely has failed. When a tire fails like this is causes damage to the sensor. I would have the sensor replaced and then it needs to be programmed to the vehicle with a scan tool. I hope this helps. If you need further assistance please let me know.