How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MB Paul Your Own Question
MB Paul
MB Paul, Mercedes Technician
Category: Mercedes
Satisfied Customers: 3567
Experience:  Qualified Mercedes Benz Diagnostic Technician - 20+ years experience - Workshop Foreman for Mercedes
15777119
Type Your Mercedes Question Here...
MB Paul is online now
A new question is answered every 9 seconds

Paul got the same Problem as

Customer Question

hi Paul
got the same Problem as http://www.justanswer.com/uk-car/423bq-just-fitted-new-starter-class-will-not-work.html
Submitted: 7 months ago.
Category: Mercedes
Customer: replied 7 months ago.
found the 3 pin plug and the violet/white cable. When its connected there is 0Volts wehen disconected i got 12,5volts on the body side
Expert:  Lou P. master tech replied 7 months ago.
Hello, are you checking when cranking?
Customer: replied 7 months ago.
yes got 12 volts but if i connected ther is 0Volt
i can put +12V on the cable an the starter is working when cranking.
what is the problem?
Expert:  Lou P. master tech replied 7 months ago.
Sounds like poor connection or broken wire, what year is your 140?? and what engine do you have.
Customer: replied 7 months ago.
82PS and 2001. No i dont think it works before the old starter broke.
Expert:  Lou P. master tech replied 7 months ago.
Ok I will have to opt out as I cannot access the info you need my apologies. Another expert should be along soon.