How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Mercedes Mechanic
Category: Mercedes
Satisfied Customers: 24668
Experience:  Over 15 years experience as a Mercedes dealer technician
14928985
Type Your Mercedes Question Here...
Pete is online now
A new question is answered every 9 seconds

Remove/replace starter 2006 ML350 4Matic. Written description

Customer Question

Remove/replace starter 2006 ML350 4Matic. Written description with illustrations.
Submitted: 7 months ago.
Category: Mercedes
Expert:  Pete replied 7 months ago.
Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay. Below is the info you requested.AR15.30-P-7100GZA Remove/Install Starter ENGINE 272, 273 in MODEL 164https://www.dropbox.com/s/6iln5835tgdantn/s-04-13.gif?dl=0Shown on model 164.1 1 Protective cap 1a Cable holder 2 Electrical connection circuit 30 3 Electrical connection circuit 50 4 Bolts M1 Starterhttps://www.dropbox.com/s/hd5l9xwcrlvomhq/st-04-13.gif?dl=02 Electrical connection circuit 30 3 Electrical connection circuit 50 5 Heat shield 5h Bracket 5m Nut M1 Starterhttps://www.dropbox.com/s/46xdis0358v8xm8/sta-04-13.gif?dl=0https://www.dropbox.com/s/dys3fj86htyj5ik/star-04-13.gif?dl=0 If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.Thanks Pete