How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, Mercedes Technician
Category: Mercedes
Satisfied Customers: 53152
Experience:  Bosch Certified Master Tech. Over 35 years experience.
13230946
Type Your Mercedes Question Here...
Marty is online now
A new question is answered every 9 seconds

When i start my s550 i get a ebr,abs and esp code they dont

Customer Question

when i start my s550 i get a ebr,abs and esp code they dont go out unless i hit the clear button then they stat out untill i start the car again
Submitted: 1 year ago.
Category: Mercedes
Expert:  Marty replied 1 year ago.

Hi, my name is***** have a permanent fault with one of the sensors in the traction control system. You need to get the car connected to a Mercedes tester that can read the fault codes in the traction control module. A faulty steering angle sensor or brake light switch or one of the other sensors in the traction control system are just some of the possibilities. The fault codes stored in the traction control module will point to the specific problem.

Let me know if you have any questions.

Marty

Expert:  Marty replied 1 year ago.

Hi, I'm just following up with you on the Mercedes. Was my answer helpful?

Related Mercedes Questions