How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, Mercedes Technician
Category: Mercedes
Satisfied Customers: 53487
Experience:  Bosch Certified Master Tech. Over 35 years experience.
13230946
Type Your Mercedes Question Here...
Marty is online now
A new question is answered every 9 seconds

Pressure washed engine on Crossfire. Why will it not shift

Resolved Question:

Pressure washed engine on Crossfire. Why will it not shift out of 2nd gear?
Submitted: 1 year ago.
Category: Mercedes
Expert:  Marty replied 1 year ago.

Hi, my name is***** won't shift out of 2nd because it's in limp home mode. Most likely you got water into a connector or module. The best thing to do is to let the car sit overnight and see if it dries out. If it stays in limp home mode overnight you will need to scan the transmission control module for codes. There are modules in the right front module box that might have gotten wet. There are also some fuses in that box that need to be checked.

Expert:  Marty replied 1 year ago.

Hi, I'm just following up with you on the Mercedes. Do you need anymore help with this?

Marty