Hello. My name isXXXXX and I have a 1990 300E 4matic and am going to replace the cruise control computer under the driver's side underdash. Should I disconnect the battery before making the switch to the new computer part? Also, what is the best way to remove the interior center pillar trim piece so I can re-glue the vinal to the trip piece? Thanks.
Model: 300E 4matic
Engine: straight 6/3.0
Replaced all other cruise control parts except for the computer.
Thanks. The trim pannel I am asking about is the pannel between the driver's door and the rear drivers side door where the seatbelt has a loop it passes through to go over the driver's shoulder.
I am not sure which weather strip you are referring to. Is it made of rubber or cloth?
Also, will I need to disconnect one end of the seatbelt to get the pannel out of the car for re-gluing?
What Happens Now?Your chat has ended, but you can still work with your Expert to get an answer to your question if you have not yet received one.Come back to this page at any time to see additional information from your Expert. You will also receive an email when your question is updated. If you want to send a message to your Expert, use the box below.If you have already received a satisfactory answer to your question, click the Accept button above. Experts are credited for each accepted answer they provide.
The rubber/cloth weatherstrip that overlaps the edge of the b-pillar trim. Yes, you will have to disconnect the end of the seat belt in the seat.
Mercedes-Benz Master Certified technician