How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, Mercedes Technician
Category: Mercedes
Satisfied Customers: 53159
Experience:  Bosch Certified Master Tech. Over 35 years experience.
13230946
Type Your Mercedes Question Here...
Marty is online now
A new question is answered every 9 seconds

Mercedes-Benz ML320 2000 ml 320 abs,bas/esp and ets lights

This answer was rated:

2000 ml 320 abs,bas/esp and ets lights are on have replaced bad brake light switch.Still have code c1401 high pressure/return pump relay.Have already tried bas control module.

eurotec :

Hi, for a C1401 I'd have suspect either a bad abs pump or a bad abs pump relay. Have you tested the pump to see if it even works?

eurotec :

If you have not replaced the relay or tested the pump I would start there. I assume that you have closely inspected the connector to the abs hydraulic unit for corrosion. It's a common problem for water to leak out of the windshield washer bottle and corrode the connector or damage the unit. I'd also inspect the ground connection for the abs pump behind the left headlamp.

eurotec :

Let me know if you have any questions.

eurotec :

And please remember to click Accept so I receive credit for my help.

Customer:

have cked ground and connectors,will verify pump thanks

eurotec :

You're welcome

Marty and other Mercedes Specialists are ready to help you

Related Mercedes Questions