Hi, on your car the bulb should just rotate counterclockwise to release it. There should be no wire clips holding it in.
Let me know if you have any trouble.
I see two wires at the back of this black filament holder (i believe). should I turn it counterclock wise.?
how much pressure should I use?? I am afraid of breaking the device
Yes you grasp the black connector and rotate it.
It shouldn't break but it can be a little snug at first.
ok I will try it in a few minutes and get back to you!
it came off, what is the next step
Just unplug the bulb from the connector and plug in your new bulb. Try to avoid touching the glass bulb.
Then insert it back into the housing and rotate it clockwise to lock it into place.
how do you unplug?
Just grasp the metal flange of the bulb and wiggle it out of the plug.
There should be two flat terminals on the bulb.
it is sharp
It helps if you use a rag or towel to hold it with.
thanks buddy. It worked.. ALL done. God Bless you. You are the best
You're quite welcome :-)
Please remember to click Accept so I can receive credit for my help :-)
where do I click accept
ok I saw it