How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bill Your Own Question
Bill
Bill, UK Technician
Category: Mercedes
Satisfied Customers: 3306
Experience:  City & Guilds
16358693
Type Your Mercedes Question Here...
Bill is online now
A new question is answered every 9 seconds

the becker radio has a lot of wires,for dash lights and other

Customer Question

the becker radio has a lot of wires,for dash lights and other things do you know all the wires and what they go to._
Submitted: 6 years ago.
Category: Mercedes
Expert:  Bill replied 6 years ago.

What is the model number of your radio.

 

Bill.

Customer: replied 6 years ago.
the model #0780, I'm taking it out and a lot of things don't work now.
Expert:  Bill replied 6 years ago.

BECKER AVUS, AVUS2000, GRAND PRIX

Becker AVUS, AVUS2000, GRAND PRIX, ...

 

A.A.-Power Antenna Turn On

1 -+12 Volt Battery Wire

2 -Dash Light Dimmer Wire

3 -+12 VOLT IGNITION WIRE

4 -Gnd

BECKER GRAND PRIX CD

Becker Grand Prix CD

A

B

C

1-Spekaer Control

1-Speaker RR+

1-Line out LR

3-Tel mute

2-Speaker RR-

2-Line out RR

4-+12 Volt Battery Wire

3-Speaker RF+

3-Gnd- Line out

5-Power Antenna Turn On

4-Speaker RF-

4-Line out LF

7-+12 VOLT IGNITION WIRE

5-Speaker LF+

5-Line out RF

8-Gnd

6-Speaker LF-

6-Control

-

7-Speaker LR+

7-20-Datalink

-

8-Speaker LR-

-

 

Bill.

Customer: replied 6 years ago.
I need a wire color diagram the stereo has been pulled out before i got it.
Expert:  Bill replied 6 years ago.

Do you have any multiplugs fitted to the radio.

 

If so, you just need to match the pins up to the car wiring. You will need a multimeter to help you identify wiring.

 

 

Bill.

Customer: replied 6 years ago.
I wish it was that simple, The pins are cut off.
Expert:  Bill replied 6 years ago.

All you can do then is use a multimeter to identify the wiring.

 

Bill.