How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Warfield Your Own Question
Michael Warfield
Michael Warfield, Factory Mercedes-Benz Technician
Category: Mercedes
Satisfied Customers: 3051
Experience:  Mercedes-Benz Master Certified technician
Type Your Mercedes Question Here...
Michael Warfield is online now
A new question is answered every 9 seconds

how to reset brake wear on clk 500

Customer Question

how to reset brake wear on clk 500
Submitted: 6 years ago.
Category: Mercedes
Expert:  Michael Warfield replied 6 years ago.

Did you reuse the brake wear sensor when you replaced the brakes?

Expert:  Michael Warfield replied 6 years ago.

The brake wear sensor doesn't have to be reset, you either have a bad brake wear sensor or maybe the other axle needs brake pads as well

Customer: replied 6 years ago.

it said something about push the reset to reset the set on dash alert

Expert:  Michael Warfield replied 6 years ago.

All you have to do is cycle the key on and off after you replaced the brake pads that were low. If that doesn't take care of it you have a brake pad at a different location that could be worn or you have a bad brake pad sensor

Related Mercedes Questions