How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1828
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 1998 IH 2500 Glider Vin 1HTGD000XWH607054 with the

Customer Question

Hello,
I have a 1998 IH 2500 Glider Vin 1HTGD000XWH607054 with the tachometer not working. The sender is in the bell housing reading flywheel teeth, but there is no harness in sight. Can you get me a wiring schematic for the tach wiring from the tach to the sensor?
Kevin
Submitted: 8 days ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 8 days ago.

My name is ***** ***** I will assist you with your question today.

I'm an independent contractor and I don't get paid until a rating has been made.

We can go back and forth as needed to help resolve the issue you are having. Follow ups are free after ratings, so rate in confidence!

What engine do you have? All my info shows no engine in your IH 2554.

_______________________________________________________________________________

You want a 5 star service and I want to provide a 5 star service. Please consider that I don't know your skill level as well as I can't see, touch, smell, hear the vehicle/machine in question. Please provide as much detail as possible and I will provide as much back.

Once an answer is provided, you should see a rating screen. Please rate my personal service to you. The ratings are my personal feedback, they are not the site feedback.

Thank you for allowing me to assist you through Just Answer!

Jeremy

Customer: replied 8 days ago.
It is equipped with a 1984 855 Cummins.
Expert:  Jeremy replied 7 days ago.

That is why I asked. That is one engine I don't work on.

I don't know enough of the Big CAM engines with how they are in the gliders. I know the glider the signal goes through a Demux module on the J1587, but I don't know how it would signal off the Big CAM.

I will opt out for another expert that would know that better.

Customer: replied 4 days ago.
We have received no follow up. Is anyone planning to respond?

Related Medium and Heavy Trucks Questions