How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4658
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 07 Freightliner M2 with a Detroit trans flashing SM

Customer Question

I have a 07 Freightliner M2 with a Detroit trans flashing SM and N on shifter indicated. Can you give me some information please, thank you!
JA: What is the complete model and serial number of your machine?
Customer: 1FUBCXCSX7DY90833,
JA: Are you fixing this yourself? What have you tried so far?
Customer: YES, I PULLED THIS CODE, 130 6H 164. Checked wiring,and fluid levels.
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: Truck was being driven, came to a stop, has not moved,and will not rev engine.
Submitted: 1 month ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 month ago.

Hi my name is***** will be glad to try to help. Bare with me while i pull up those codes

Expert:  Daniel Wilson replied 1 month ago.

Which transmission make and model is in this truck from the ID tag? Eaton, Allison, Mercedes, Meritor? 130 BH 164 is the transmission module the fault exists but not the full code. Let me know the make and model and we can see if we can pull the codes without the scan tool. Try pressing the mode/reset buttons to scroll through the codes logged. Let me know

Customer: replied 1 month ago.
Im, not at the truck at this time, but I remember the tag said it was a fully automated manual trans. I'll be back at truck tommorrow!
Customer: replied 1 month ago.
Mercedes-Benz MBT
Expert:  Daniel Wilson replied 1 month ago.

Thanks for the update. Try to press and hold the mode reset buttons to scroll through to get the full fault codes and grab the model number if you can.

Customer: replied 1 month ago.
Model MBT660AGS
SER# *****
DATE CODE 22-05-2014
R26R660AGSXB01THE ONLY CODES PULLED FROM TRUCK WITH A BOSCH SCAN TOOL ARE SID52 FIM7
Hyd system incorrect reply from mechanical system
SID254 FIM12
Control 1 control unit or component defective
Customer: replied 1 month ago.
The tag shows to be a reman Detroit Diesel
Customer: replied 1 month ago.
Shows to have two codes on push mode.
130-052-07
BH164-030-07
Expert:  Daniel Wilson replied 1 month ago.

030 7 Suspension Dump No Pressure Feedback . Means the controller is not sensing the suspension has dumped or getting feedback signal to the Bulkhead module. Check the wiring and connector pins for corrosion or damage.

Expert:  Daniel Wilson replied 1 month ago.

130 52 07 comes up as a transmission clutch fault. Check for a possible faulty clutch. Try disconnecting the batteries and resetting the system to see if the fault returns. Let me know

Customer: replied 1 month ago.
Is there an adjustment for clutch
Expert:  Daniel Wilson replied 1 month ago.

Not usually on an autoshift transmission unfortunately. But this will need to be checked and confirmed it is the problem before going after the clutch.

Customer: replied 1 month ago.
Is there a procedure for this?
Expert:  Daniel Wilson replied 1 month ago.

If it is a Solo self adjusting, here is the information on the clutch. The wear indicator indicates if the clutch is in need of replacement. Click below.

Solo Information

Related Medium and Heavy Trucks Questions