How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4373
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

2006 freightliner 60 series detroit 1FUJAGCK06LW87224 code

Customer Question

2006 freightliner 60 series detroit 1FUJAGCK06LW87224 code 128 with a PID code 084 fail 12. sounds like its missing. running rough, changed fuel filter
Submitted: 15 days ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 15 days ago.

Hi my name is***** will be glad to help. Bare with me while I pull up your code. Is that the only code you are getting?

Customer: replied 15 days ago.
sid code 002 with a fail of 00
Expert:  Daniel Wilson replied 15 days ago.

That is for the Vehicle speed sensor at the rear of the transmission. check the sensor and harness....

Customer: replied 15 days ago.
ok the second code I gave you would be the speed sensor. what about the code "128 engine code" "PID 084" "Fail 12"
Customer: replied 15 days ago.
we replaced the vehicle speed sensor and now we get code 128 SID 002
Expert:  Daniel Wilson replied 14 days ago.

MID - Message Identification

Identifies the Module or ECU that transmits the fault code

PID- Parameter Identifier

Identifies the data from the faulty electrical component

SID – Subsystem or Status Identification

Identifies the status or condition of the electrical component

FMI – Failure Mode Identifier

Identifies the TYPE of failure in the signal or sub-system (listed below)

As an example, received diagnostic information may look like:

MID – PID/SID - FMI

128 – 084 - 002

128 = ENGINE (source of the diagnostic code)
084 = VSS Vehicle Speed Sensor (the faulty data pertains to)
002 = Data Erratic, Intermittent or Incorrect (signal quality)

Expert:  Daniel Wilson replied 14 days ago.

List of FMI messages:

FMI

Description

0

Data valid but above normal range

1

Data valid but below normal range

2

Data erratic, intermittent or incorrect

3

Voltage above normal or shorted to high source

4

Voltage below normal or shorted to low source

5

Current above normal or open circuit

6

Current below normal or grounded circuit

7

Mechanical system not responding or out of adjustment

8

Abnormal frequency or pulse width or period

9

Abnormal update rate

10

Abnormal rate of change

11

Failure code not identifiable

12

Bad intelligent device identifiable

13

Out of Calibration

14

Special Instructions

15 – 30

RESERVED

31

NOT AVAILABLE

Expert:  Daniel Wilson replied 14 days ago.

128 SID 2 is a #2 injector code

Click here

Troubleshooting

Expert:  Daniel Wilson replied 14 days ago.

Possible injector harness issue or injector problem.