How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4848
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

It hesitate to start until I press menu code on the system,

Customer Question

It hesitate to start until I press menu code on the system
JA: What is the complete model and serial number of your machine?
Customer: Model s250 turbo - *521315172*
JA: Are you fixing this yourself? What have you tried so far?
Customer: Yes, check the connector on the actuator and wiring system
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: Bobcat start the lift and the tilt pedal are not functioning.
Submitted: 6 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 6 months ago.

Hi my name is***** will be glad to try to help. What are you getting for fault codes? Check all fuses and relays as well as safety switches such as lap bar, seat switch, or door switch if equipped. Try having the lift tile actuators recalibrated as well and let me know what you have for codes.

Customer: replied 6 months ago.
HI Dan the inner lock system not sending power to the solenoid and actuator. Fuses and relay still good. It ☔ season here and I only work on it on my spare time. The menu code is not functioning.
Expert:  Daniel Wilson replied 6 months ago.

thanks for the update. I help on here in my spare time as well so no worries. We can post as needed. Check for power to the hydraulic control valve solenoids as it is possible you have a failed controller if the controller has safety switch engaged signal but not powering the solenoids to open up the functions. See if your dealer can bench test and reprogram your existing controller and see if it reveals a failed controller or resolves your issue. Let me know

Expert:  Daniel Wilson replied 5 months ago.

Hi, Did you get this resolved? If so please take a moment to rate my service as that is how the site credits for my time helping on the site.

Related Medium and Heavy Trucks Questions