How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1726
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I am a mechanic here at yrc freight. I replaced an ecm on a

Customer Question

I am a mechanic here at yrc freight. I replaced an ecm on a previously running tractor and now I have a no start. I have checked all fuses at the battery and the ground fuse by the ecm. I have checked that the ecm is powering up as I have the check engine light on and off. I have checked to make sure I have power at the fuel shutoff. These ecms are flashed before being shipped. I check with the insite software, but get a communication error that tells me my connection to ecm does not exist. Do you have any ideas?
JA: What is the complete model and serial number of your machine?
Customer: I don't have that info right here.
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: not that I can think of
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  Alex Olsen replied 3 months ago.

hi i alex, what model cummins is this? what error pops up on insite

Expert:  Alex Olsen replied 3 months ago.

still need help?

Related Medium and Heavy Trucks Questions