How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4291
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

8.3 to changed timing sensors in back side of

Customer Question

8.3 to changed timing sensors in back side of front cover between fuel pump & air compressor.2 sensors side by side
Submitted: 1 month ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 month ago.

Hi my name is ***** ***** will be glad to try to help. What is the complete engine model and serial number from the ID tag? Cummins?

Customer: replied 1 month ago.
that is the question eng # 45701803 CPL2092
Customer: replied 1 month ago.
8.3 liter eng # 45701803 CPL2092
Expert:  Daniel Wilson replied 1 month ago.

The sensors will pull out once the hold down is removed. You should be able to twist and turn the sensor while pulling to remove them. The new sensor will install by pushing it into the bore and securing the hold down. Let me know

Customer: replied 1 month ago.
do you have to remove the fuel pump
Expert:  Daniel Wilson replied 1 month ago.

It would give you more room to get in there and only a couple bolts to remove it but that is up to you. It would make it easier to access.

Related Medium and Heavy Trucks Questions