How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2514
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

I am currently doing a seal service on a Daewoo 5.5 tonne ex

Customer Question

I am currently doing a seal service on a Daewoo 5.5 tonne ex and I have difficulty in removing the piston from the main boom ram shaft. Your help would be much appreciated.
JA: What is the complete model and serial number of your machine?
Customer: Serial # 013999 Engine # 183442 model 1999/2000 5.5 Solar
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: no
Submitted: 2 months ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 2 months ago.

Good morning sorry for delay

When I have a ram stuck inside the cylinder I use a porta power and attach it to inlet of cylinder and hand pump to push out ram

out, as long as snap rings are removed it will come out.

click here for porta power

You can even leave machine hydraulic line attached and extend boom but it is a bigger mess