How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cat Man Your Own Question
Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 8421
Experience:  I am ASE Master Truck Certified.
30708357
Type Your Medium and Heavy Trucks Question Here...
Cat Man is online now
A new question is answered every 9 seconds

2007 c-15 nxs cam and crank sensor location I'm getting a

Customer Question

2007 c-15 nxs cam and crank sensor location I'm getting a 22-11 (42)
JA: What is the complete model and serial number of your machine?
Customer: nxs02778
JA: Are you fixing this yourself? What have you tried so far?
Customer:(###) ###-####
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: no
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  Cat Man replied 3 months ago.
Thanks for asking your question. I will try and help you out.
The 22-11 does not indicate a timing sensor fault. It indicates the cam to crank timing signal is off more than 3 degrees. This code is caused by the get timing off or the idler gear backlash is out of specs. I've seen this occur sometimes when the head has been off or the cam and front cover has been off.
You will need to check gear timing and reset the idler backlash.
Please reply back if you need more help or have more questions. I am happy to assist.
Expert:  Cat Man replied 3 months ago.
Hey. I just wanted to see how things were going. Please let me know if you need more help. I am happy to assist. If my information was helpful, please leave a good or higher rating so that I receive credit. Thanks.

Related Medium and Heavy Trucks Questions