How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1702
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Right turn signal works on tractor not trailer dash and

Customer Question

right turn signal works on tractor not trailer dash and trailer lights just stay on while tractor flashes front and rear
JA: What's the make/model/year of your truck? Engine type?
Customer: 1995 international 9200 eagle cummins
JA: Are you fixing your truck yourself? What have you tried so far?
Customer: yes and mechanic is stumped also or he needs more time
JA: Anything else you want the truck mechanic to know before I connect you?
Customer: replaced trailer light cord and trailer socket on tractor
Submitted: 4 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 4 months ago.

Hi i'm Wayne

I will tr to help you with this

is this the same trailer all the time

have you tried it on another trailer ??

Let me know

Customer: replied 4 months ago.
on every trailer and when not hooked to trailer
Expert:  Wayne replied 4 months ago.

Thank you for that

so if you check that pig tail, no trailer , does it work in the pig tail

flash a test light ?

Customer: replied 4 months ago.
replaced pig tail and socket on the tractor replaced all wire ends and cleaned up grounds
light stays solid dash board light and to the trailer again front and rear turn signal flashes
Expert:  Wayne replied 4 months ago.


Yes, but the test light flash in the cord ??

also measure the voltage in the pig tail

Customer: replied 4 months ago.
no stays solid
Expert:  Wayne replied 4 months ago.


Measures the volts need to be 12+

Customer: replied 4 months ago.
We have 12 volts
Expert:  Wayne replied 4 months ago.

OK, thank you for that

1st replace the flasher , I know it works on the truck

2nd is to run a separate ground from the

pig tail to a good know ground, battery,etc

Customer: replied 4 months ago.
New flasher
Direct ground
Still same
Expert:  Wayne replied 4 months ago.


This is a very strange one

I called a buddy of mine , he said to check the system controller for the lights

but was not sure where it was on this model

see if that helps

Customer: replied 4 months ago.
You charged me 45.00 dollars for useless info
Expert:  Wayne replied 4 months ago.


You were not charged any thing it was a deposit

unless you rate 3 or more stars

you can ask for a refund from customer service

Related Medium and Heavy Trucks Questions