How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west..
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1152
Experience:  Technican with 20 years experience focused on engines and electrical.
35815791
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

I have a 2008 Kenworth w the c13 cat I have flat code

Customer Question

Hi I have a 2008 Kenworth w the c13 cat I have flat code 3719-16 I can not get it to complete a regen
JA: What is the complete model and serial number of your machine?
Customer: Model t800 KenworthVin 1XKDDU8X78J216551
JA: Are you fixing this yourself? What have you tried so far?
Customer: I baked the filter
Change fitting filter lines
No fault codes only critical event is the spot level is high level 3 most severe
My tempature on intake is around 396 outlet about 1015
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: No that's about it... I just need the help
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  go-west.. replied 3 months ago.
Good evening
What is your engine serial number?
Do you have ET?
Thanks
Customer: replied 3 months ago.
I not in front of my serial # of the engineYes I do have ET
Expert:  go-west.. replied 3 months ago.
It would really help
Expert:  go-west.. replied 3 months ago.
It will help me get you specific information.
Customer: replied 3 months ago.
Let me see if I could get somehow... Give me a few and I'll get it mean while this is the failed test message I got
Expert:  go-west.. replied 3 months ago.
Try to run it a couple of times
Make sure the engine is at least 180 f. before starting
Customer: replied 3 months ago.
I have tried it several times the fault code I had was 3791-0 most severe
Customer: replied 3 months ago.
It won't complete the full regen cycle
Expert:  go-west.. replied 3 months ago.
Oky

Related Medium and Heavy Trucks Questions