How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4752
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Got a 2005 international with isx Loss of power and

Customer Question

Got a 2005 international with isx
Loss of power and derateing power
No codes in motor ECM
Got trans codes and red Service light flashes on shifter knob
Vin 2hschapr46c219942
Submitted: 7 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 7 months ago.

Hi Eric, My name is***** are you getting for fault codes and what is your transmission model and chassis model? Let me know

Customer: replied 7 months ago.
Sid 61 fmi 7, pid 191 fmi 8. Eaton fuller lightning series
Expert:  Daniel Wilson replied 7 months ago.

pid 191 fmi 8 is an output speed sensor fault. Check the harness from the transmission speed sensor to the TCM and ECM.

Expert:  Daniel Wilson replied 7 months ago.

61 7

Splitter failed to

Engage

System

Operate vehicle and perform several range up

shifts and down shifts. The failure is detected after

5 consecutive attempts to complete the same type

of range shift. Several shifts (10 or more) may be

necessary before the controller confirms the failure.

Expert:  Daniel Wilson replied 7 months ago.

Click this link for some more in depth troubleshooting help. Let me know

Troubleshooting

Related Medium and Heavy Trucks Questions