How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1898
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Eng Turns Over Not starting & poping the 40amp fuse and

Customer Question

Eng Turns Over Not starting & poping the 40amp fuse and breaker when it was running would not go in to Stand by, But worked ok by shuting off in sleeper
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: thats
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: Spokane thermal king replaced the fuel silonied & 40 amp fuse
Submitted: 10 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 10 months ago.

Hi my name is***** will try to help. What is the make and model of the engine and model/serial number of your refer unit?

Expert:  Daniel Wilson replied 10 months ago.

Any fault codes?