How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1635
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

My machine is a 320l with 6000 hrs machine wont turn this

Customer Question

my machine is a 320l with 6000 hrs machine wont turn this all started about 3 months ago when it was cold would trun fine then when heated up wouldnt turn i think its the spool needs resealed
Submitted: 4 months ago.
Category: Medium and Heavy Trucks
Customer: replied 4 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 4 months ago.
Expert:  cat_engines_only replied 4 months ago.

I am sorry no one could help you earlier.

Do you mean the machine will not turn with the travel levers?

The spools have no seals, they are fit to the bore of the valve.

You are more likely needing the seals in the rotary joint replaced. (Hydraulic swivel joint in the center of the machine.)

This is where the travel fluid is passed to the undercarriage to go to the drive motors.

Please let me know if I can help you with this or if you have already found an answer.

Related Medium and Heavy Trucks Questions