How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1588
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

I'm researching trying to find the physical location of part

Customer Question

I'm researching trying to find the physical location of part number(###) ###-#### on a ISX400ST in a 2006 International. Cummins couldn't even figure this out. We have tried several dealers as well and know one knows where this part is located on the truck.
JA: We'll do all we can to help. Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: Not that I can think of....this is the code it is throwing causing the fan clutch to stay engaged constantly. Cummins told us it is somewhere between the bunk and the front bumper...so helpful right?
Submitted: 10 months ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 10 months ago.

Hi there . My name is Andy ! What is the description of the part ?

Expert:  Andy replied 10 months ago.

Also , I need the engine serial number please ?

Customer: replied 10 months ago.
Part(###) ###-####is ambient air temp controller
Customer: replied 10 months ago.
Stand by for serial number
Expert:  Andy replied 10 months ago.

ok

Customer: replied 10 months ago.
6CB3E144 Ref#
Engine# *****
Expert:  Andy replied 10 months ago.

Please do not forget to rate my service to you ! Thanks!

Customer: replied 10 months ago.
Is like a diagram of where it is located precisely. I have the info you gave me already.
Expert:  Andy replied 10 months ago.

If you follow the main wiring harness along the inside of the left frame rail , you will find a two wire sensor sitting there by the fifth wheel , front diff area just tied up against the harness hanging off of it .

Expert:  Andy replied 10 months ago.

I will try and find a pic of one for you .

Expert:  Andy replied 10 months ago.

It will look similar to this and in this location above the front diff

https://www.dropbox.com/s/oy0pd23vdkqtwxw/ambient.PNG?dl=0

Customer: replied 10 months ago.
Thank you. I'll see if we can find it.
Expert:  Andy replied 10 months ago.

It was my pleasure ! Please do not forget to rate my service to you . That is the only way I am rewarded at all on here . Thank you !

Expert:  Andy replied 10 months ago.

Do you still need help with this ? Please let me know ! Thanks and please do not forget to rate my service to you at the end !

Expert:  Andy replied 10 months ago.

Please rate my service to you at the end or I receive nothing for trying to help you . Thanks

Related Medium and Heavy Trucks Questions