How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1634
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

My brother put a new ignition switch in my TH83 Cat

Customer Question

My brother put a new ignition switch in my TH83 Cat telehandler, how can I tell if it is wired correctly?
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: The machine started ran a very short time and slowly died out... Originally I thought the machine ran out of fuel but if actually fully... When crack the injector feed line to attempt s bleed, there is little to no fuel coming out,
JA: Is there anything else important you think the Heavy Equipment Mechanic should know?
Customer: No
Submitted: 4 months ago.
Category: Medium and Heavy Trucks
Expert:  Bradley Martin replied 4 months ago.

Do you know the serial number of this lift?

Expert:  Bradley Martin replied 4 months ago.

Also can you tell me where each colored wire is hooked to on the ignition switch.