How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west..
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1192
Experience:  Technican with 20 years experience focused on engines and electrical.
35815791
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

I'm getting no data on the dash. I'm getting a code ID of

Customer Question

I'm getting no data on the dash. I'm getting a code ID of 608 and fm of 12 if that helps
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Expert:  go-west.. replied 11 months ago.
Good evening
What is the make and model of the truck your working on?
Customer: replied 11 months ago.
2001 freightliner columbia. Vin is J13038
Expert:  go-west.. replied 11 months ago.
Is you engine a series 60?And if so how many connectors are on the engine ecm?
Customer: replied 11 months ago.
6 I think
Expert:  go-west.. replied 11 months ago.
OK
What is going on is the data link has been interupted to the dashThe data link on these trucks have 2 junctions one behind the datalink connector to the left of the drivers seat the other below the garbage door centre dash lowerYou need to undo one connector at a time and see what's causing the issue when the dash starts working again we can narrow it further from thereThese junctions or splice plugs will have usually three or four connectors going to them and the wires will be twistedLet me know how you do

Related Medium and Heavy Trucks Questions