How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2499
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

Cummins shut done after it starts and warming up, changed

Customer Question

cummins shut done after it starts and warming up
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: changed the crank sen,.
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: my psi seems hi but don.t know what it s to be
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Customer: replied 3 months ago.
I need it now boss on my ass
Customer: replied 3 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  spankyjr1 replied 3 months ago.

would you please post yr,make model of vehicle and engine serial and model number?

What psi is high?

Does check engine light come on before it dies out?

Any codes?

Customer: replied 3 months ago.
94year kw T600 engine cummins engine #11719818 N14-350E what psi does the fuel be at no no
Expert:  spankyjr1 replied 3 months ago.

Thanks for info

Fuel pressure to start engine is only about 20 psi but as you raise rpm and put a load on engine fuel pressure will increase to over 150 psi.

What kind of fuel pressure do you have?

Any exhaust smoke and what color?

Does engine sound smooth when running or sound as if it has a miss?

What was original issue before replacing Engine position sensor?

Customer: replied 3 months ago.
psi is 140 at idle no smoke what so ever sounds good till it starts to die then it suppers about 2 r 3 times and dies same thing
Expert:  spankyjr1 replied 3 months ago.

pull fuel check valve out of ecm cooling plate, it's the front fitting, it probably came apart or has some junk in it

It's also possible you are getting compression in fuel system from a sticking injector check valve but normally you get a miss when that happens

If you still want a phone call click accept so We can talk and go over everything pretty fast.

Please take the time to Rate me with stars at top of page so I get credit from the web site for my time..
you may still follow up after rating if needed
Thank You!.

Customer: replied 3 months ago.
ok i'll ck. let u know
Expert:  spankyjr1 replied 3 months ago.

Okay sounds good

Customer: replied 3 months ago.
no ck valve in it ck 5 difer. places
Customer: replied 3 months ago.
it run then like u turn key off
Expert:  spankyjr1 replied 3 months ago.

Needs to have check valve click here for location and image

If you think its a power issue check to make sure you are NOT loosing power to shutdown solenoid when it dies

if you are loosing power re check for codes using cruise switches, if you don't know how let me know

let me know codes

Customer: replied 3 months ago.
it don't and if ur asking if it looses volts at the selnioe it does back in forth then dies it has 12v. or better when running
Customer: replied 3 months ago.
I have no way of getting codes
Expert:  spankyjr1 replied 3 months ago.

Then it does have a code if you are loosing power to solenoid here is how to get codes

Use the following procedure to retrieve the flash codes from the check engine light:
Turn the ignition key switch to the On position/ Engine OFF.
Turn the cruise control ON/OFF switch to the OFF position.
Move the SET/RESUME switch to either position. Hold that position until the yellow lamp begins to flash.
The yellow lamp will flash in order to indicate a three digit flash code and the SET/RESUME switch may be released.
The sequence of flashes represents the system diagnostic message. Count the first sequence of flashes in order
to determine the first digit of the flash code. After a two second pause, the second sequence of flashes will identify
the second digit of the flash code, then the third
Any additional flash codes will follow after a longer pause.
It will keep repeating codes until you turn off key.
Any questions just let me know.

Expert:  spankyjr1 replied 3 months ago.

You need power to solenoid all the time with key on or engine will die

I have other things to do today, will be gone for several hours, if you want the phone call we need to do it soon.

Customer: replied 3 months ago.
Expert:  spankyjr1 replied 3 months ago.

let me know what codes you have then accept answer so I can call


Customer: replied 3 months ago.
thanks get back to u
Expert:  spankyjr1 replied 3 months ago.


Related Medium and Heavy Trucks Questions