How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cat Man Your Own Question
Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 8327
Experience:  I am ASE Master Truck Certified.
Type Your Medium and Heavy Trucks Question Here...
Cat Man is online now
A new question is answered every 9 seconds

Peterbilt c13 check engine light on, 520193-3 cgi gas

Customer Question

Peterbilt c13 check engine light on, 520193-3 cgi gas temperature voltage above normal. Jumped plug with paper clip 520193-4 came up so I changed sensor , cleared code and comes right back
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  Cat Man replied 3 months ago.
Thanks for asking your question. I will try and help you out.
Your troubleshooting is correct. When jumping changes the code to a -4 short. The sensor should have been the problem.
Since the -3 came back, you either got a bad out of the box sensor, which is rare.
Or there is an intermittent problem in the wiring harness.
Please reply back if you need more help or have more questions. I am happy to assist.
Expert:  Cat Man replied 3 months ago.
Hey. I just wanted to see how things were going. Please let me know if you need more help. I am happy to assist. If my information was helpful, please leave a good or higher rating so that I receive credit. Thanks.

Related Medium and Heavy Trucks Questions