How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west..
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1160
Experience:  Technican with 20 years experience focused on engines and electrical.
35815791
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

I have a 10 speed auto matic and it grinds bad on take off

Customer Question

I have a 10 speed auto matic and it grinds bad on take off then clears up and no more problems
Submitted: 6 months ago.
Category: Medium and Heavy Trucks
Customer: replied 6 months ago.
It is in a 2007 international eagle 9400i
Expert:  go-west.. replied 6 months ago.
Good evening
You here this grind only at launch?
Customer: replied 6 months ago.
loaded or empty
Customer: replied 6 months ago.
it is loud
Expert:  go-west.. replied 6 months ago.
Sounds like the clutch is going
Can you take the cover off at the Bell housing and check for pieces?
Customer: replied 6 months ago.
I am on the road now do you know about how much it will cost to replace
Expert:  go-west.. replied 6 months ago.
Probably 2000 in parts and 10 hours labour
Expert:  go-west.. replied 6 months ago.
Let me know how you do
Customer: replied 6 months ago.
Ok like I said as soon as the truck moves it quits making noise
Expert:  go-west.. replied 6 months ago.
it sounds like the clutch because it only happens when it engages and it to roll.
Once ingaged it's applied and it isn't subject to that initial slippage as when the clutch first applies to get you moving
Expert:  go-west.. replied 6 months ago.
Let me know if you have any other questions

Related Medium and Heavy Trucks Questions