How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4290
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

2009 m2 ECU 128 Sid 380, fail 11 ECU 128 Sid 324 fail 00

Customer Question

2009 m2 ECU 128 Sid 380, fail 11
ECU 128 Sid 324 fail 00
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 3 months ago.

Hi my name is***** is the complete model number from the engine ID tag so I can gove you the correct troubleshooting for your engine for these codes?

Customer: replied 3 months ago.
Isc 260 / eng no 46978859
Expert:  Daniel Wilson replied 3 months ago.

This fault code becomes active when the aftertreatment diesel oxidation catalyst inlet and aftertreatment diesel particulate filter inlet temperature sensors do not detect the presence of a catalyst in the aftertreatment system. This can be caused by tampering with the catalyst system, the catalyst has been removed from the vehicle, or a damaged catalyst


Fault Code: 1664
PID: S380
SPN: 3050
FMI: 11
LAMP: Amber

Catalyst Missing - Condition Exists. The aftertreatment catalyst in the exhaust system is not present.

Active aftertreatment diesel particulate filter regeneration will be disabled

Expert:  Daniel Wilson replied 3 months ago.



Fault Code: 1922
PID: S324
SPN: 3251
FMI: 0/0

Aftertreatment Diesel Particulate Filter Differential Pressure - Data Valid but Above Normal Operational Range - Most Severe Level. The soot load of the aftertreatment diesel particulate filter has exceeded the recommended limits.

The stop engine light will illuminate. Severe engine derate.

This is an indication of a soot plugged DPF system. You will need to service and clean the DPF system as well as replace the DPF filter. Then try a succesful regen to reset the system. Let me know

Related Medium and Heavy Trucks Questions