How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Your Own Question
Jeremy, Certified Truck/Bus Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 2730
Experience:  ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician
Type Your Medium and Heavy Trucks Question Here...
Jeremy is online now
A new question is answered every 9 seconds

I have a Detroit 60 ,00 it has a code 1, It tries to start

Customer Question

Hi i have a Detroit 60 ,00 it has a code 1
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Truck Mechanic can help you best.
Customer: It tries to start with starting fluid
JA: Is there anything else the Heavy Truck Mechanic should be aware of?
Customer: The level of antifreeze is good, I have not started in few weeks
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Truck Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 3 months ago.

My name is ***** ***** I will assist you with your question today.

I'm an independent contractor and I don't get paid until a rating has been made.

We can go back and forth as needed to help resolve the issue you are having. Follow ups are free after ratings, so rate in confidence!

There is no flash code 1. There is a flash code 11, but no 1.


VSG Sensor Input Voltage Low

Is that what you meant?


You want a 5 star service and I want to provide a 5 star service. Please consider that I don't know your skill level as well as I can't see, touch, smell, hear the vehicle/machine in question. Please provide as much detail as possible and I will provide as much back.

Once an answer is provided, you should see a rating screen. Please rate my personal service to you. The ratings are my personal feedback,

they are not the site feedback.

Thank you for allowing me to assist you through Just Answer!


Expert:  go-west.. replied 3 months ago.
Good afternoon
Are you still looking for help?
Expert:  Jeremy replied 3 months ago.

Can you verify the code and get back when you can, please?

Customer: replied 3 months ago.
The ecm is sending that there is one active code, how do I check the code
Expert:  Jeremy replied 3 months ago.

What is the make and model of the vehicle?

You have a diagnostic button and when you press it, the codes start flashing on the dash via the check engine light and the shut down light. They are two digit codes and will flash in a sequence. Check engine lights are inactive/passive codes and the shut down light will be active codes.

Customer: replied 3 months ago.
Freightliner 00 Detroit 60
Customer: replied 3 months ago.
How to get the code
Expert:  Jeremy replied 3 months ago.

Look for your diagnostic button and push it. The flash codes will start flashing. I stated that already...

Related Medium and Heavy Trucks Questions