How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cumminsdr Your Own Question
cumminsdr
cumminsdr, Mechanic
Category: Medium and Heavy Trucks
Satisfied Customers: 3544
Experience:  All types of Cummins applications
28984014
Type Your Medium and Heavy Trucks Question Here...
cumminsdr is online now
A new question is answered every 9 seconds

I have a DOC off a 2012 Freightliner N2 cummins 8.3. I am

Customer Question

I have a DOC off a 2012 Freightliner N2 cummins 8.3. I am trying to find the part# ***** the DOC
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Truck Mechanic can help you best.
Customer: Customer wants a new one, does not want to use his old one
JA: Is there anything else the Heavy Truck Mechanic should be aware of?
Customer: no, just trying to get the part# ***** it
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Truck Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Expert:  cumminsdr replied 5 months ago.

The part number is ***** etched on the DOC . It will be near the top of one of the ends. You should see a code like CP and than the part number. in many cases you need to clean or steam off the doc casing real good to see it. I may be able to find it with the engine serial number but it is best practice to get it directly off the DOC. Or you acn call FL and give them the VIN to get the part number it was built with. Please don't forget to rate my service.

Expert:  cumminsdr replied 5 months ago.

See pic to assist on showing what you are looking for

Expert:  cumminsdr replied 5 months ago.

Hi, Just following up. Please don't forget to rate my service.

Expert:  cumminsdr replied 4 months ago.

Hi, Just following up. Please don't forget to rate my service.

Related Medium and Heavy Trucks Questions