How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 8274
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

Piston to cylinder wall clearance on a 6Bt cummings diesel

Customer Question

Piston to cylinder wall clearance on a 6Bt cummings diesel fresh rebore.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: I am having to rebore the engine block 1.00 oversize . the piston diameter is4.075 and the block bore is 4.016 what is the std. piston to cylinder wall clearance?
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 4 months ago.

Hi I'm Wayne

I will help you with this

the piston to cylinder wall clearance is .004 to .007

I hope this helped you

If this helped you

Please rate my answer 3 or more Stars

If more info is need use reply button

Not Poor/Bad Service

Related Medium and Heavy Trucks Questions