How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roybelding Your Own Question
roybelding
roybelding, Shop Foreman Freightliner trucks
Category: Medium and Heavy Trucks
Satisfied Customers: 4639
Experience:  Shop Froeman for Freightliner Trucks
3506196
Type Your Medium and Heavy Trucks Question Here...
roybelding is online now
A new question is answered every 9 seconds

I have a 2005 international that has a catapillar C13 with a

Customer Question

I have a 2005 international that has a catapillar C13 with a FRO16210C 10 SPEED TRANSMISSION, THE PROBLEM I'M HAVING IS - WHEN I SHIFT DOWN ON THE RANGE SELECTOR IT SLAMS IT INTO THE LOW SIDE .. CAN ANYONE TELL ME WHAT MY PROBLEM IS ?
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Expert:  William Herren replied 5 months ago.
Hello, my name is ***** ***** I will be assisting you.
Customer: replied 5 months ago.
I don't see your answer
Expert:  William Herren replied 5 months ago.
I apologize, I need more information. Can you describe exatlcy what happens, What gears your shifting from?
Customer: replied 5 months ago.
I have a 10 speed transmission, 5 low gears and 5 high gears... if I'm stopping at a red light and I need to push the range selector down to go into a lower gear it slams it into the low side ..
Expert:  William Herren replied 5 months ago.
How long have you had this truck and did the issue just start?
Expert:  roybelding replied 5 months ago.

hello, do you still need help???

Customer: replied 5 months ago.
Expert:  roybelding replied 5 months ago.

good morning my name is ***** ***** I will assist

it is a good possibility the range cylinder itself may be the issue. make sure the air lines are tight and secure. if they are good, I would suspect the cylinder it self needs to be re built.

Roy

Expert:  roybelding replied 5 months ago.

hello, are you there

Expert:  roybelding replied 5 months ago.

do you still need help?????