How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1591
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

International 7500 with DT360 ICP sensor voltage code

Customer Question

International 7500 with DT360 ICP sensor voltage code
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Customer: replied 1 year ago.
Removed sensor plug to harness valve cover, don't have wiring diagram for circuit. 5v at center pin, pin to front of motor 0.4v pin to rear of motor 0.5v disconnected from sensor, removed valve cover tested plug at end of harness same. Replaced ICP sensor. No change voltage on ServiceMaxx for ICP 0.00v used continuous monitor test while moving wires no reading still
Customer: replied 1 year ago.
D340 model*
Customer: replied 1 year ago.
Anyone?
Expert:  FSM09 replied 1 year ago.

Hello, when you unplugged the sensor was there oil present in the connector.

Customer: replied 1 year ago.
No oil in any of the connections. I need the wiring information to trace it back to the ECM.
Expert:  FSM09 replied 1 year ago.

Ok thank you. I will need to opt out because I don't have access to the wiring diagrams at this time. I hope someone will be with you shortly.

Expert:  Andy replied 1 year ago.

Hi there . My name is Andy ! Can we start eith the last 8 digits of the vin number please?