How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 9222
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

I HAVE A VOLVO D13F485 SERIAL # 925196 I NEED TORQUE SPECS

Customer Question

I HAVE A VOLVO D13F485 SERIAL # ***** I NEED TORQUE SPECS AND SEQUENCE ON ROCKER SHAFT
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Truck Mechanic can help you best.
Customer: WE REPLACED A FUEL INJECTOR
JA: Is there anything else the Heavy Truck Mechanic should be aware of?
Customer: NO
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Truck Mechanic about your situation and then connect you two.
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Customer: replied 11 months ago.
Do you have any status as of yet?
Expert:  Wayne replied 11 months ago.

Hi I'm Wayne

I will help you with this

give me a few minutes to look this up

Expert:  Wayne replied 11 months ago.

HI

Install the rocker arm shaft's bolts.

Check that the valve yokes are in the correct position on the valve stem

torque is 110 Ft Lbs , start in the middle work outward at 25 Ft lbs

until you have reached 110 Ft Lbs

If this helped you

Please rate my answer 3 or more Stars

If more info is need use reply button

Not Poor/Bad Service

Customer: replied 11 months ago.
Do you have valve adjustment same engine
Expert:  Wayne replied 11 months ago.

Hi

Yes I do

give me a minute to look it up

Expert:  Wayne replied 11 months ago.

Hi Here e is the Volvo link to adjust the valves

click here

Please remember to rate my answer, so I get credit for the question

Expert:  Wayne replied 11 months ago.

Hi

Just a follow up with you

did my answer help you

let me know, Please

Wayne

Expert:  Wayne replied 11 months ago.

HI

Just follow up with you

how is the project going

do you need any more help

let me know,

Wayne